Tutorial - Super Duper Quick and Easy Tablet Sleeve

Is Santa bringing you a shiny new tablet for Christmas? If so, you might want to make a protective sleeve for it. Here is the fastest sleeve you will ever make! They are so fast that I made three of them in under 2 hours! After I made one for my tablet, I decided that I needed one for my keyboard (the one that attaches to my tablet), and one for my travel mouse. This is also perfect if you like to throw an e-reader into your bag! I didn't want a flap of any kind, I wanted to be able to put the tablet in my purse and just pull it out of the sleeve. I did however add a KamSnap to the center to keep it from sliding out if my purse or tote bag were to fall over. The snap is optional. If you want a snap and don't have the KamSnap system, you can use a regular sew-on snap. OK, let's get started!

First, you're going to need the following items:
Exterior fabric
Lining fabric
Fusible fleece
    The amounts for the above items will be determined by how large your tablet or device is. 

Another note about the fabric, if you pre-wash it, don't use fabric softener. It can prevent your fusible fleece from sticking properly.

You will also need:
Thread to match fabric
KamSnaps or sew-on snap (both optional)
General sewing supplies such as scissors, pins or clips, needles, iron, sewing machine, etc. A cutting mat and rotary cutter is helpful, but not necessary.

Instructions:
1.  The first thing you need to do is measure your tablet or device. If you have any buttons or ports that extend beyond the device, you will need to be sure to include that in your measurement.

First, determine how you want your tablet to slip into your sleeve. I like mine to have the opening along the longest part of the tablet since it will fit in my purses and totes best. I will take that measurement first, it will be my "width." Be sure to include the tablet's depth in this measurement. I will then add 1 1/4 inches to that number. This will allow for your 1/4 inch seam allowance and give you a perfect fit. You don't want it too tight.

Example: My tablet measures 10 3/4 inches (including the depth), so I'll be cutting my fabric at 12 inches wide. 

To get the measurement of the height (top to bottom when it's in the sleeve) you are going to measure all the way around, and add 3 inches to that number.

Example: My tablet measures just under 15 1/2 inches all the way around, so I will cut that fabric 18 1/2 inches. This will give plenty of room if you want to add a snap at the top. If not, any excess can be cut away later.

Note: If your exterior fabric has a one way design such as words, you can add another 1/2 inch to this number, then cut the fabric in half, place the two pieces right sides together, then stitch along the bottom edge using a 1/4 inch seam allowance. Only do this with your exterior fabric, unless your lining fabric has a one way design also.

2.  Now that your exterior fabric is cut, cut these same amounts from the fusible fleece, and lining fabric.

3.  Iron the fusible fleece to the back side of the exterior fabric. Be sure to follow the manufacturer's instructions for the brand of fleece you will be using.

4.  Fold this piece with right sides together and stitch down each side, leaving the top open. Repeat this with the lining fabric. You can cut away some of the bulk from the seam allowance if you want, just don't get too close to the stitching.

5.  Turn the exterior fabric right side out and iron. Slip the lining inside the exterior fabric (wrong sides facing each other) and pin at the seams to hold temporarily. Slip the tablet inside and fold the upper edges to the inside, where you want the opening to end. If you kept your seam allowances at 1/4 inch, your tablet should fit in perfectly. As you can see, before I folded my edges in, I had quite a bit of excess fabric at the top. I decided that I want a snap, so by folding my fabric about 3/4 inches, I will have enough room for my snap. Now, take out the tablet and remove the pins. Fold the edges 3/4 inches to the wrong side and iron. Repeat this step with the lining.

Note: If you don't want a snap or closure of any kind, you can simply cut away the excess so that you only have about 1/2 to 3/4 inches to turn under.

 

6.  Slip the lining back into the exterior, lining up at the seams and the folds. Take back to your machine and stitch along the upper edge, close to the folds. Your open arm works well for this step.

7.  If you have a snap to attach, you can do that now. That's it! You are done!

Do you prefer a flap on your tablet sleeve, or maybe you'd like to make a simple wristlet? I've got you covered! I just happen to have a tutorial right here on the blog, where I made one with a flap. You can find it right HERE.

Do you like free embroidery designs and tutorials?

Be sure to sign up for the weekly newsletter to get a free design every weekend (unless I'm running a sale). Sign up for Sher's Creative News

Tutorial - Festive Table Runner and Pillows

It's been a few years since I've brought these to the front! Here are two super easy tutorials to get  your home in the holiday spirit, or just make them up in colors to match your every day decor!

Pillow tutorial can be found HERE

Table runner tutorial can be found HERE

Enjoy!

Happy Thanksgiving!

Wishing you all a very safe and Happy Thanksgiving!

Be sure to stop by Sher's Creative Space on Friday when we begin our Black Friday sale where every pattern is 20% OFF when you use coupon code:

BLACKFRIDAY

Let the holiday crafting begin!!!

Stitch Up A Memory!

In the photo above you will see one of my favorite gifts ever received. My daughter in law had it made for me using one of my dad's favorite shirts. She didn't know it when she was having it made, but I actually bought that shirt for him the previous Father's Day. I will treasure this forever!

There are so many great things you can stitch up from clothing that belonged to loved ones for either a special occasion, or as a memory project.

I've seen so many great ideas for this. In one of my sewing groups a lady made boxy zipper bags for her family members from some of her mother's favorite skirts. She shared a picture and the were beautiful!

Other great ideas would be making a christening gown out of a wedding dress, or sachets from clothing items. How about Christmas ornaments from some of their jewelry or clothing? There are so many small things that you can make from a loved one's clothing that other family members will cherish.

I was very lucky because I had two dad's growing up. My biological father who is living in Florida with my bonus mom (aka stepmom), and I also have the dad that raised me. He passed just under two years ago. I wrote him a poem for his 80th birthday and I'm sharing it below. As much as I believe in a bloodline, I also believe 100% in a LOVE line!

That Special Someone

As we walk the path of life

we will meet many people.

Some people will come and go

with nothing more than a glance or a nod,

while others will come into your life

and leave an impression one way or another.

But every now and then

you will come across someone so special

who will touch you in a way

that will change you forever.

When you are blessed enough

to have this person in your life,

you will treasure them, and love them,

and hang on to every moment,

and hold a place for them in your heart forever.

Written by Sheryl Lynn Hastings

Purge, Donate, Up-cycle, Recycle

Before you throw out or toss to the side, see if you can bring that old item back to life!

I pull off any embellishments such as zippers, buttons, and purse hardware before tossing the item, especially from purses. If you sew, you know how valuable zippers and hardware can be. For the zippers, I keep a basket in my sewing room to store them until I can get a chance to separate them from the fabric. This is a great project to do while watching a movie with the hubster. 

My daughter is a master of up-cycling. When I was out visiting her this summer I was admiring her pegboard that she made for her office/studio. I couldn't believe it when she told me the cute little holders used to be Crystal Light containers! After spraying them with a plastic paint, she put a sealer on them and added some embellishments. How cute!

In the photo above you will also see how she took old book pages, tea dyed them, and decoupaged them to the table and lampshade. She even made the lamp base out of old books!

My next project will be this really cute Collapsible Thread Catcher from The Fabric Therapy Blog. Can you believe it's made from parts of a Pringles container?

Next time you think about de-cluttering, think about the many different things you could do with the items you no longer want.

Mug Rug Patterns Ideas - Trucks with Tree and Camper!

I asked what you'd like to see on a mug rug and you told me! I have quite a list and I'm hoping to get to each and every one of them. Some are for Christmas and New Year's, so obviously I'll get to those first. 

My first two are from Melanie and Carole. How fitting that they both involved a truck! This made it easier for me to do two at once. 

Carole asked for a camper on a truck, while Melanie wanted to see a truck with a tree that had just been cut down for Christmas.

You can find the Perfect Christmas Tree Mug Rug Pattern HERE, and the Let's Go Camping Mug Rug Pattern HERE.

Thank you ladies and everyone else for sharing your fun and creative ideas. If I haven't gotten to yours yet, don't worry, it's on the drawing board and will be published in the near future.

Keep the great ideas coming!!!

Always Looking for Fresh and New Ideas!

I figure I have around 200 mug rug patterns in my shops. Many of you don't know this, but some of them were designed for my customers who were looking for something special. Every now and then I get an email with a request for a certain mug rug design. I do my best to come up with exactly what they want. They are always thrilled with the results.

Do YOU have anything special you'd like to see in a mug rug design? If so, then send an email to sheryl@sherscreativespace.com and I'd love to take a look at it! And remember, the appliques used for the mug rugs can be used on numerous other projects!

And did I mention that there is a bonus in it for you if I use your idea? Yep! There sure is!

To see my already huge selection of mug rugs, stop by Sher's Creative Space.

Tutorials - Earbud Round-up!

Back in the day, it wouldn’t be uncommon to see a teenager walking down the street with a cord hanging from their ears to some kind of musical device. Technology has certainly changed things. Now I’m seeing more and more women and men (my age and older) walking past my house, waiting for a bus, and even strolling through the grocery store with that same cord connected to their ears! 

Now that most people have smartphones they can be listening to everything from music, to podcasts, to audio books. Yesterday I was in WalMart and an older woman, probably in her 70’s was listening to something with her earbuds. I was so tempted to ask her what she was listening to, but I didn’t.

I carry my earbuds in a little zipper case that I made (last tutorial down) in my purse, which keeps them nice and tangle free. Here is a nice little round-up of some very different, fun, and free tutorials to keep your earbuds neat and tidy.  

Here’s a cute one that has been knitted.
http://www.hugsforyourhead.com/2014/09/earbud-pouch-free-knitting-pattern.html

I love the fun shape of this one!
http://tizzycrafts.blogspot.co.uk/2012/05/earbud-case-tutorial.html

Do you like to work with leather? These look pretty simple and cute.
http://www.designertrapped.com/diy-earbud-holder/

How about this folded flower. I love the use of the KamSnaps with this one.
http://sueoverydesigns.com/blog/earbud-case-ith/

Are you not a fan of sewing? How about these cute cases made from mint holders!
http://www.makeit-loveit.com/2015/05/make-an-earphone-holder-from-a-mint-container.html

This one is too cute for words. It’s a felt owl. The tutorial calls for wool felt, but I would use my plain old acrylic. I think it would be just as cute.
http://empressofdirt.net/diy-ear-bud-case/

This cute floral earbud case doubles as a business card holder too!
http://www.polkadotchair.com/2016/01/diy-earbuds-case.html/2/

Don’t forget mine! This is one of my older tutorials, but still useful! It can hold other things such as sweetener packets and even coins.
http://sherscreativespace.blogspot.com/2015/09/scrap-buster-earbud-case-or-tiny-coin.html

So what do you listen to when you have that cord hanging from your ears?

For one week only you can get the pattern for this trick or treat bag duo for only $2.75! After Halloween, the kids will have a cute totebag to pack up for a weekend at Nanas! You can find this deal right HERE. Offer expires September 29th.

Sewing for a Cause 2016

It’s that time of year again when people are thinking about the upcoming holidays and the hustle and bustle begins! It’s also the time when people think that it’s time to give back. In the photo above is a bunch of small wallets that I’m stitching up to donate to our local animal rescue group so they can use them for their holiday fundraisers. This year I’m also going to do the Case for Smiles project (link below) where I’ll be making some fun and colorful pillowcases for children in a hospital.

If you aren’t sure where to begin, here are a few links to get you inspired:

Hey bag makers! Here’s a place where you can make purses for girls in school:
http://sewpowerful.org/ 

Here is one of my favorites which I will be participating in this year. You can make some quick and easy pillowcases that will be given to kids with cancer. Make sure they are fun and colorful!
http://caseforsmiles.org/ 

Here’s one for adults and children. Make some chemotherapy turbans.
http://www.sewing.org/html/turban.html 

How about making a blanket for a child in need? Give them a little extra comfort that they so desperately need.
http://www.projectlinus.org/about/

Since many of you know, our furry little friends are very near and dear to my heart, make up some simple beds that they can snuggle on while in the shelter and waiting for their forever homes.
http://kennelcomforters.blogspot.com/ 

Still haven’t found one that tickles you fancy? Here is a whole list of them!
http://www.sewingpartsonline.com/blog/sew-for-charity.aspx 

Do you prefer to support your local charities? Call your local humane societies, churches, women’s shelters, and hospitals to see where help is needed. Many of them do fundraisers throughout the year, while some of them will take any items that someone will find helpful. How about stopping by your local assisted living places or nursing homes, and see if someone could use a walker caddy or another personal item. Not everyone there is lucky enough to have family visit so their needs go unnoticed. You can even start your own!

Whether you sew for charity, shovel your elderly neighbor's driveway, or volunteer your time where needed, one thing is for sure, it will make your heart feel good! That's what I call a Win/Win!

Super Quick and Easy Luggage Tag Tutorial

Don’t you just love this bag? It’s a pattern from Two Pretty Poppets. It’s actually a beach tote but it fits my needs for a perfect weekender travel bag. Just one thing missing......a luggage tag!

These tags are seriously so quick and easy to throw together. To make your own, you can dig into your scrap pile because it really doesn’t take much. I used a fairly light weight plastic for the window but you can leave it open if you want, just be sure to make your information card larger than the opening. You can also skip the window and just make a plane pocket. I like the window because it’s a perfect fit for a business card. As for the plastic, it’s not expensive. I got mine from the remnant bin at JoAnn Fabrics.

To make your own you are going to need:

Fabric as follows:
(1) 2 x 12 inches for the strap
(2) 3 1/2 x 5 1/2 inches for the backing
(2) 3 1/2 x 5 inches for the pocket
(2) 3 1/2 x 5 1/2 inches for the flap

Interfacing as follows:
(2) 3 1/2 x 5 1/2 inches for flap and backing
(1) 3 1/2 x 5 inches for the pocket
(1) 2 x 12 inches for strap

You will also need:
(1) 3 1/2 x 5 inch piece of plastic (optional)
(1) KAM Snap set (size 20), or a sew-on snap (8 or 10 mm)
Thread to match fabric
General sewing supplies

Important notes:
**You will be using a 1/4 inch seam allowance for all stitching. Make sure that you do not go under that amount, in fact, it’s OK if you go just a smidge over.

**Fabrics can match, contrast, or you can use the same for all the pieces.

**Avoid touching the plastic with your iron. It could melt. Also, when pinning the pieces together, make sure not to poke the pins into any part of the plastic that will show (such as the window).

**Don’t make your stitches too small because you could actually perforate your plastic and it could tear during use.

**If pre-washing fabrics, do NOT use fabric softener. It can prevent you fusible adhesive from sticking.

Let’s begin:
1.  Fuse the interfacing to the backs of the corresponding fabrics. You will have a piece of interfacing for each of the four sets (backing, pocket, flap, and strap).

2.  With right sides together, pin the sets together. There will only be one fabric piece for the strap. Make sure all your edges line up evenly and round your corners. I used a quarter. Do not round the corners of the strap piece.

3.  Take the window pieces (3 1/2 x 5 inch piece), that are still right sides together, and lay them on your work surface with the interfacing side facing up. Draw a line 3/4 inch down from each edge. This will create your window.

NOTE: In my sample photo, you can see my pen lines extending past the corners, just don't stitch past the corners on those lines. Just stitch the square.

4.  Stitch on those lines pivoting at the corners. Remove from machine and draw diagonal lines from corner to corner creating an “X.” Cut on the lines. Clip as close to the corners as you can without snipping through your threads.

5.  Trim the excess inner fabric (that was once the X) down to 1/4 inch away from the seam.

6.  Turn this piece right side out by pushing one of the layers of fabric through the window just as if you were making a zipper opening in a garment. Be sure all the raw edges line up perfectly an iron well. Baste 1/8 inch away from the outer edges to hold. Be sure to use your large basting stitch because you will be removing some of the basting stitches later.

7.  Decide which side you want showing and place the window with this side up on top of your plastic. The raw edges of the fabric will line up with the edges of the plastic. Pin or clip to secure. Stitch plastic in place by stitching about 1/8 inch from edge of window opening. Be sure to stitch with the fabric on top of the plastic. Carefully trim away excess plastic about 1/8 inch away from the stitching line. I decided to cut the plastic much bigger than it needed to be to make lining up and stitching easier.

8.  Remove the basting stitches along one of the short edges and down about 3/4 inch on each side. Turn these raw edges to the inside 1/4 inch and iron. Stitch close to the folds to create the top edge of your pocket. Remember to be careful with the iron and the plastic.

9.  Place this piece on top of one of your backing fabric pieces (the one that has the interfacing fused to the back). Both of these will have their right side facing up. Line them up at the bottom edge. Now place the remaining backing fabric on top of these with the wrong side facing up. Pin or clip to secure.

10. Stitch around the edges. You will begin your stitching just at the beginning of the upper curve, and end your stitching at the same place on the other side. You want a nice opening at the top to turn right side out.

11. Clip curves and turn right side out. Turn the upper edge under 1/4 inch to the inside. Iron. Set aside.

12. Fold your strap piece in half lengthwise with wrong sides together. Fold the remaining two raw edges to meet at the center and fold back in half. You will now have a piece that measures 1/2 inch wide and 12 inches long. Stitch along each long edge close to folds.

13. Fold in half and slip the ends into the opening on the tag backing and pocket you just assembled. They should go in about 1/2 inch. Pin or clip to secure. Top stitch around the entire thing about 1/8 inch from edge.

14. With the right sides together, stitch around the flap pieces beginning and ending your stitching just like you did in step 10 when stitching your backing fabric and your pocket.

15. Clip curves, turn right side, out and iron. Top stitch around outer edges. 

16. Place this on top of your backing/window piece with the right top side of the flap facing up. Stitch near the upper edge about 1/4” down, and stopping and starting your stitching about 1/2 inch away from sides.

17. Attach the snap of your choice, insert business card or other ID, then hang from your travel bag.

Do you like free embroidery designs and tutorials?

Be sure to sign up for the weekly newsletter to get a free design every weekend (unless I'm running a sale). Sign up for Sher's Creative News